LUXE PACK New York connects premium-packaging brands with manufacturers and material specialists. For independent builders placing product counters in front of a printed backlit display, this selection helps evaluate the lightbox as part of the sample presentation. Compare all 26 LED Modules products below.
Test the printed backdrop with the actual packaging on the counter
Build a representative section of the printed lightbox and place the intended packaging samples at their planned counter height and distance from it. Check whether the illuminated graphic makes a clear, glossy or metallic pack difficult to distinguish, hides a printed label or creates a distracting reflection on the sample. Keep room lighting, the sample orientation and the lightbox artwork fixed while comparing component layouts. Record the source setting together with the packaging finish and counter position; an attractive empty backdrop does not approve the complete product presentation.
Retain a packaging reference when changing the lightbox source
Keep the accepted packaging sample, printed backdrop and counter-position record for later component comparisons. After an LED model, CCT choice or layout changes, return the same pack to the recorded position and review both the backdrop and the product's visible detail. If the packaging finish or display position changes instead, reassess that arrangement before reusing the old lighting approval. Internal lightbox LEDs do not replace a separate task light needed for product examination, and their specifications alone do not establish a calibrated color-evaluation environment.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Will choosing a higher-CRI lightbox module guarantee accurate packaging colors?
No. The printed backdrop, packaging finish, ambient light and viewing arrangement also affect what visitors see. Evaluate the actual presentation. These are components for independently designed graphic lightboxes, with no implied compatibility with a proprietary rental frame, video wall or packaging-inspection system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the lightbox section, backdrop artwork, packaging finish and counter-layout drawing to discuss an LED-module sample for the intended presentation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
LUXE PACK New York connects premium-packaging brands with manufacturers and material specialists. For independent builders placing product counters in front of a printed backlit display, this selection helps evaluate the lightbox as part of the sample presentation. Compare all 26 LED Modules products below.
Test the printed backdrop with the actual packaging on the counter
Build a representative section of the printed lightbox and place the intended packaging samples at their planned counter height and distance from it. Check whether the illuminated graphic makes a clear, glossy or metallic pack difficult to distinguish, hides a printed label or creates a distracting reflection on the sample. Keep room lighting, the sample orientation and the lightbox artwork fixed while comparing component layouts. Record the source setting together with the packaging finish and counter position; an attractive empty backdrop does not approve the complete product presentation.
Retain a packaging reference when changing the lightbox source
Keep the accepted packaging sample, printed backdrop and counter-position record for later component comparisons. After an LED model, CCT choice or layout changes, return the same pack to the recorded position and review both the backdrop and the product's visible detail. If the packaging finish or display position changes instead, reassess that arrangement before reusing the old lighting approval. Internal lightbox LEDs do not replace a separate task light needed for product examination, and their specifications alone do not establish a calibrated color-evaluation environment.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Will choosing a higher-CRI lightbox module guarantee accurate packaging colors?
No. The printed backdrop, packaging finish, ambient light and viewing arrangement also affect what visitors see. Evaluate the actual presentation. These are components for independently designed graphic lightboxes, with no implied compatibility with a proprietary rental frame, video wall or packaging-inspection system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the lightbox section, backdrop artwork, packaging finish and counter-layout drawing to discuss an LED-module sample for the intended presentation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.