Searching for Learning Technologies lightbox LED modules? Compare internal sources for a printed wall you own and build, after deciding whether you need components or a complete hired display.
Do I need a complete hired lightbox or LED components?
A hired lightbox package and loose LED components serve different needs. These products are internal sources for your own specified build; they do not include a frame, graphic, hire service or permission to alter a rented system.
What should I check behind a single-sided printed wall?
Compare edge-lit and rear-backlight arrangements with the finished face, usable depth and rear panel. Test the actual print in the planned frame; a complete package’s dimensions do not establish a module fit.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What frame and wiring information is needed?
Send your own frame section, usable cavity, face and rear-panel materials, source mounting plan and supply details. Confirm wiring and component changes with the builder before choosing modules.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with your owned lightbox wall’s frame and print details to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for Learning Technologies lightbox LED modules? Compare internal sources for a printed wall you own and build, after deciding whether you need components or a complete hired display.
Do I need a complete hired lightbox or LED components?
A hired lightbox package and loose LED components serve different needs. These products are internal sources for your own specified build; they do not include a frame, graphic, hire service or permission to alter a rented system.
What should I check behind a single-sided printed wall?
Compare edge-lit and rear-backlight arrangements with the finished face, usable depth and rear panel. Test the actual print in the planned frame; a complete package’s dimensions do not establish a module fit.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What frame and wiring information is needed?
Send your own frame section, usable cavity, face and rear-panel materials, source mounting plan and supply details. Confirm wiring and component changes with the builder before choosing modules.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with your owned lightbox wall’s frame and print details to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.