Looking for JLC LIVE lightbox LED modules or LED bars for a construction supplier’s printed display? Compare internal sources for brand and assembly-diagram lightboxes beside manufacturer demonstration areas.
Will small assembly labels stay readable on an illuminated graphic?
Test the actual print with its arrows, section lines and small labels at both conversation and aisle distances. Uneven backlighting can distract from fine detail, while extra brightness cannot correct small type. Compare source length, lens direction and spacing with the usable frame depth and print transmission before approving a layout.
Where should the lightbox sit beside construction product samples?
Check the view with the planned samples and demonstration props in place. Leave the message visible when visitors gather, and keep graphic removal and cable access clear of the demonstration route. If the artwork changes between product demonstrations, keep the same sample-test procedure for each new print; the lighting layout is not automatically approved for every graphic.
Compare LED lightbox sources
- Linkable edge-lit bars: DC24V, 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° optics.
- 10W slim edge-lit bar: DC24V, 360×23×16mm including lens, 1100lm, 9°×50° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Can these modules provide working light for the live demonstration?
They are internal sources for printed graphic lightboxes. Workshop task lighting, tool illumination and outdoor or dusty-site suitability need separate specifications. For the graphic circuit, verify each model’s voltage, connector pinout, polarity and linking limit; size an external driver for the connected wattage with suitable headroom.
Before ordering
Confirm dimensions, usable depth, mounting spans and print transmission. Plan reachable disconnection and check cable rating and voltage drop. A compatible external driver is required; fit in another supplier’s complete SEG frame is not assumed.
Compare all 26 LED Modules below. Send your diagram print, viewing distances, sample-display layout and frame section for a selection enquiry.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for JLC LIVE lightbox LED modules or LED bars for a construction supplier’s printed display? Compare internal sources for brand and assembly-diagram lightboxes beside manufacturer demonstration areas.
Will small assembly labels stay readable on an illuminated graphic?
Test the actual print with its arrows, section lines and small labels at both conversation and aisle distances. Uneven backlighting can distract from fine detail, while extra brightness cannot correct small type. Compare source length, lens direction and spacing with the usable frame depth and print transmission before approving a layout.
Where should the lightbox sit beside construction product samples?
Check the view with the planned samples and demonstration props in place. Leave the message visible when visitors gather, and keep graphic removal and cable access clear of the demonstration route. If the artwork changes between product demonstrations, keep the same sample-test procedure for each new print; the lighting layout is not automatically approved for every graphic.
Compare LED lightbox sources
- Linkable edge-lit bars: DC24V, 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° optics.
- 10W slim edge-lit bar: DC24V, 360×23×16mm including lens, 1100lm, 9°×50° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Can these modules provide working light for the live demonstration?
They are internal sources for printed graphic lightboxes. Workshop task lighting, tool illumination and outdoor or dusty-site suitability need separate specifications. For the graphic circuit, verify each model’s voltage, connector pinout, polarity and linking limit; size an external driver for the connected wattage with suitable headroom.
Before ordering
Confirm dimensions, usable depth, mounting spans and print transmission. Plan reachable disconnection and check cable rating and voltage drop. A compatible external driver is required; fit in another supplier’s complete SEG frame is not assumed.
Compare all 26 LED Modules below. Send your diagram print, viewing distances, sample-display layout and frame section for a selection enquiry.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.