Looking for JCK lightbox LED modules? Compare internal sources for your own printed jewelry-photo or lifestyle lightbox beside a product display.
Which LEDs should I use behind jewelry photographs?
Compare edge-lit and rear-backlight layouts with the actual print. Check fine settings, dark metal outlines and pale highlights in the intended frame at the viewing distance.
Can these LEDs illuminate the actual jewelry case?
Specify photographic lightboxes and product-case lighting separately. A backlit photo does not demonstrate how real gemstones or reflective metal will look under display-case lights.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What sample should I send before ordering?
Send a photo-print sample, frame section, usable depth and supply details. Verify mounting and source spacing for your own lightbox; no gemstone-colour guarantee or fit in a supplied case is claimed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with the photo sample and lightbox dimensions to compare internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for JCK lightbox LED modules? Compare internal sources for your own printed jewelry-photo or lifestyle lightbox beside a product display.
Which LEDs should I use behind jewelry photographs?
Compare edge-lit and rear-backlight layouts with the actual print. Check fine settings, dark metal outlines and pale highlights in the intended frame at the viewing distance.
Can these LEDs illuminate the actual jewelry case?
Specify photographic lightboxes and product-case lighting separately. A backlit photo does not demonstrate how real gemstones or reflective metal will look under display-case lights.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What sample should I send before ordering?
Send a photo-print sample, frame section, usable depth and supply details. Verify mounting and source spacing for your own lightbox; no gemstone-colour guarantee or fit in a supplied case is claimed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with the photo sample and lightbox dimensions to compare internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.