Building illuminated storage towers for the International Builders’ Show, also called IBS? Compare internal LED bars for static brand graphics, then specify the reception-counter lightboxes separately from software-demo screens.
How many LED bars does an IBS lightbox tower need?
Tower height alone cannot determine LED quantity. Measure each illuminated face, clear depth and mounting space. Include doors, shelves and internal supports in the section drawing so the layout can account for shadows and service access. Test the actual transmitting graphic before approving bar spacing.
Can the reception counter use the tower’s LED layout?
A narrow counter graphic and a tall tower face have different source-to-graphic distances and obstructions. Prepare separate layouts and load calculations. Compare edge-lit sources with rear-backlight sources against the actual section; do not multiply a counter’s bar count by the tower’s height.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these LED modules for the software-demo screens?
No. These bars light static printed graphics inside compatible lightboxes. Monitors, touchscreens and decorative hanging signs need their own equipment. Record each lightbox circuit separately and retain access to its connections after the storage structure is assembled.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all 26 products below. Send labelled tower and counter sections, front-material samples, mounting positions and driver details for a component quote. Identify rented parts before requesting changes; LED bars do not include the tower structure or screens.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Building illuminated storage towers for the International Builders’ Show, also called IBS? Compare internal LED bars for static brand graphics, then specify the reception-counter lightboxes separately from software-demo screens.
How many LED bars does an IBS lightbox tower need?
Tower height alone cannot determine LED quantity. Measure each illuminated face, clear depth and mounting space. Include doors, shelves and internal supports in the section drawing so the layout can account for shadows and service access. Test the actual transmitting graphic before approving bar spacing.
Can the reception counter use the tower’s LED layout?
A narrow counter graphic and a tall tower face have different source-to-graphic distances and obstructions. Prepare separate layouts and load calculations. Compare edge-lit sources with rear-backlight sources against the actual section; do not multiply a counter’s bar count by the tower’s height.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these LED modules for the software-demo screens?
No. These bars light static printed graphics inside compatible lightboxes. Monitors, touchscreens and decorative hanging signs need their own equipment. Record each lightbox circuit separately and retain access to its connections after the storage structure is assembled.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all 26 products below. Send labelled tower and counter sections, front-material samples, mounting positions and driver details for a component quote. Identify rented parts before requesting changes; LED bars do not include the tower structure or screens.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.