Planning portrait lightboxes for an IMEX America destination or hotel pavilion? Select internal LEDs for printed graphics viewed beside partner meeting seats, with a separate layout for each actual frame.
How do I check a portrait lightbox from the meeting seats?
Test the final destination image at the planned seated and standing viewing positions. Look for bright bands, dark ends and lost detail in skies, buildings or faces. Include nearby counters and seating in the trial so visible image areas, mounting and cable access match the real layout.
Can every portrait frame use the same LED arrangement?
Only after checking each frame's depth, transmitting media and mounting positions. Compare edge-lit and rear-backlit layouts using the actual print. Label each frame's source, white-tone selection and compatible supply; matching outlines alone do not establish matching illumination.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Will these LED modules operate a pavilion video screen?
No. These bars illuminate a printed lightbox face; they are not video pixels, a screen controller or a complete display. Identify which pavilion panels are printed lightboxes before choosing components. Keep screen wiring and the lightbox DC circuit separately specified.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all 26 options below. Send portrait graphic sizes, frame sections, seated viewing positions and existing driver details for a component quote. Confirm access and approval with the pavilion builder before changing rental equipment.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Planning portrait lightboxes for an IMEX America destination or hotel pavilion? Select internal LEDs for printed graphics viewed beside partner meeting seats, with a separate layout for each actual frame.
How do I check a portrait lightbox from the meeting seats?
Test the final destination image at the planned seated and standing viewing positions. Look for bright bands, dark ends and lost detail in skies, buildings or faces. Include nearby counters and seating in the trial so visible image areas, mounting and cable access match the real layout.
Can every portrait frame use the same LED arrangement?
Only after checking each frame's depth, transmitting media and mounting positions. Compare edge-lit and rear-backlit layouts using the actual print. Label each frame's source, white-tone selection and compatible supply; matching outlines alone do not establish matching illumination.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Will these LED modules operate a pavilion video screen?
No. These bars illuminate a printed lightbox face; they are not video pixels, a screen controller or a complete display. Identify which pavilion panels are printed lightboxes before choosing components. Keep screen wiring and the lightbox DC circuit separately specified.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all 26 options below. Send portrait graphic sizes, frame sections, seated viewing positions and existing driver details for a component quote. Confirm access and approval with the pavilion builder before changing rental equipment.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.