Looking for IBEX fabric lightbox LED modules? An event-specific display supplier offers double-sided LED fabric lightboxes. Compare internal sources for your own indoor printed display, checking both sides before ordering.
Can I judge a double-sided lightbox from its front face alone?
Test both actual printed faces. Different artwork, backing and internal obstructions may change their appearance. Keep the viewing conditions consistent and examine each side from the intended aisle direction.
Do I simply double the LED quantity for two printed faces?
Do not size the source from the face count alone. Review frame sections, source positions and optical paths, then test the intended arrangement. Calculate the power load from the exact selected modules and wiring layout.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these modules suitable as boat navigation lights?
This selection concerns indoor printed exhibition lightboxes. No marine navigation, vessel installation or weather-exposure suitability is claimed; choose those products against their own requirements.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send both graphics, frame sections, internal bracing and proposed wiring through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for IBEX fabric lightbox LED modules? An event-specific display supplier offers double-sided LED fabric lightboxes. Compare internal sources for your own indoor printed display, checking both sides before ordering.
Can I judge a double-sided lightbox from its front face alone?
Test both actual printed faces. Different artwork, backing and internal obstructions may change their appearance. Keep the viewing conditions consistent and examine each side from the intended aisle direction.
Do I simply double the LED quantity for two printed faces?
Do not size the source from the face count alone. Review frame sections, source positions and optical paths, then test the intended arrangement. Calculate the power load from the exact selected modules and wiring layout.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these modules suitable as boat navigation lights?
This selection concerns indoor printed exhibition lightboxes. No marine navigation, vessel installation or weather-exposure suitability is claimed; choose those products against their own requirements.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send both graphics, frame sections, internal bracing and proposed wiring through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.