Searching for foodpro lightbox LED modules? The installer’s project shows differently sized lightboxes displaying product images and information. Compare sources for your own printed panels beside equipment demonstrations.
Can different-sized panels use the same LED layout?
Do not assume they can. Record each panel’s dimensions, usable depth, print material and source direction. Compare the proposed layout for each box rather than copying one quantity across every display.
What should I check when photos and text share a panel?
Test the actual printed photo and wording together. Look for bright bands through pale image areas and check that the smallest intended text is readable from the aisle. Judge the complete printed panel rather than exposed LED brightness.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
How should I record several panels for an enquiry?
Give each box a label and list dimensions, chosen sources, quantities and compatible supply details beside it. These LEDs are components for printed lightboxes, not machine-inspection or food-processing lights. No fit in the case-study frames is claimed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with a labelled panel list and samples showing both photos and text to compare LED sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for foodpro lightbox LED modules? The installer’s project shows differently sized lightboxes displaying product images and information. Compare sources for your own printed panels beside equipment demonstrations.
Can different-sized panels use the same LED layout?
Do not assume they can. Record each panel’s dimensions, usable depth, print material and source direction. Compare the proposed layout for each box rather than copying one quantity across every display.
What should I check when photos and text share a panel?
Test the actual printed photo and wording together. Look for bright bands through pale image areas and check that the smallest intended text is readable from the aisle. Judge the complete printed panel rather than exposed LED brightness.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
How should I record several panels for an enquiry?
Give each box a label and list dimensions, chosen sources, quantities and compatible supply details beside it. These LEDs are components for printed lightboxes, not machine-inspection or food-processing lights. No fit in the case-study frames is claimed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with a labelled panel list and samples showing both photos and text to compare LED sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.