Searching for EUROBIKE lightbox LED modules or LED bars for backlit printed exhibition walls? Compare internal sources for translucent bicycle-brand panels separately from opaque graphics and overhead stand lighting.
Which LEDs suit backlit exhibition wall graphics?
Match source dimensions and optics to the real backlit print, usable frame depth and mounting spans. Compare edge-lit and rear-backlight layouts with your actual print sample.
Which printed sections actually transmit light?
Mark the translucent and opaque blockout sections on your wall plan. Test light spread and graphic continuity across their boundaries; opaque printed sections cannot be made into backlit faces simply by adding LEDs behind them.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What print media, frame and power details should I send?
Send backlit print samples, illuminated and blockout section plans, frame depths, mounting spans, viewing positions, connector access and supply. Verify fit and model-specific wiring limits. These are graphic lightbox sources; they do not imply bicycle headlight or e-bike electrical compatibility.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your print sample and wall-section plan to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for EUROBIKE lightbox LED modules or LED bars for backlit printed exhibition walls? Compare internal sources for translucent bicycle-brand panels separately from opaque graphics and overhead stand lighting.
Which LEDs suit backlit exhibition wall graphics?
Match source dimensions and optics to the real backlit print, usable frame depth and mounting spans. Compare edge-lit and rear-backlight layouts with your actual print sample.
Which printed sections actually transmit light?
Mark the translucent and opaque blockout sections on your wall plan. Test light spread and graphic continuity across their boundaries; opaque printed sections cannot be made into backlit faces simply by adding LEDs behind them.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What print media, frame and power details should I send?
Send backlit print samples, illuminated and blockout section plans, frame depths, mounting spans, viewing positions, connector access and supply. Verify fit and model-specific wiring limits. These are graphic lightbox sources; they do not imply bicycle headlight or e-bike electrical compatibility.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your print sample and wall-section plan to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.