EFKA's on-demand webinar Peesdoeken in ledframes covers printed textiles, dimensional fit and LED technology with Durst and Texo Trade Services. For an independently designed indoor fabric lightbox, compare all LED Modules here and use your actual graphic in the evaluation.
Evaluate a printed textile with the intended light source
Record the textile, print method, graphic dimensions and frame section. Use the finished printed face in a complete sample, rather than judging a LED bar against an unprinted swatch. Examine light distribution, image appearance and fit together; the collection does not certify a print process or textile for every model.
Keep print and lighting changes traceable
Identify the selected LED model, optics, mounting layout and suitable separate power and controls in the sample record. If the textile, printing or face geometry changes, compare the revised sample before production. LED specifications describe the component, while the result through the printed fabric depends on the complete construction.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does the EFKA webinar make these modules approved EFKA replacement parts?
No. The webinar is a recorded industry learning activity, not approval of BOOTH LIGHTS products. No EFKA, Durst or Texo Trade Services affiliation or universal frame compatibility is claimed. Confirm the exact construction and component fit before ordering.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the textile and print method, graphic dimensions, frame section, candidate models and sample observations through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
EFKA's on-demand webinar Peesdoeken in ledframes covers printed textiles, dimensional fit and LED technology with Durst and Texo Trade Services. For an independently designed indoor fabric lightbox, compare all LED Modules here and use your actual graphic in the evaluation.
Evaluate a printed textile with the intended light source
Record the textile, print method, graphic dimensions and frame section. Use the finished printed face in a complete sample, rather than judging a LED bar against an unprinted swatch. Examine light distribution, image appearance and fit together; the collection does not certify a print process or textile for every model.
Keep print and lighting changes traceable
Identify the selected LED model, optics, mounting layout and suitable separate power and controls in the sample record. If the textile, printing or face geometry changes, compare the revised sample before production. LED specifications describe the component, while the result through the printed fabric depends on the complete construction.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does the EFKA webinar make these modules approved EFKA replacement parts?
No. The webinar is a recorded industry learning activity, not approval of BOOTH LIGHTS products. No EFKA, Durst or Texo Trade Services affiliation or universal frame compatibility is claimed. Confirm the exact construction and component fit before ordering.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the textile and print method, graphic dimensions, frame section, candidate models and sample observations through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.