Building a tall graphic lightbox beside storage at an ECOC Exhibition stand? Compare internal LED bars for printed company and solution graphics. All 26 Modules products are below.
Will a tall back-corner graphic stay evenly illuminated?
Test the full printed height in its actual frame. Inspect the top, lower corners and support shadows from both open aisles. Review the message beside nearby screens; uniform backlighting and readable artwork need separate checks.
How should lightbox wiring work beside a storage door?
Map the door swing, graphic-removal route and driver access. Keep connections clear of hinges and stored equipment. Label each frame section and test maintenance access without dismantling the demonstration area.
Compare LED lightbox sources
- 20W rigid edge-lit bar: DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics.
- Linkable edge-lit bars: DC24V, 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Can these modules illuminate or test optical communications equipment?
They are internal light sources for compatible printed display lightboxes. They are not optical-test equipment, transceiver components or screen electronics. Keep graphic-lightbox selection separate from the technical demonstration's lighting requirements.
Before ordering
Featured bars require separate DC24V constant-voltage supplies. Confirm load, polarity, connector pinout and cable capacity. Only the featured linkable family lists up to five compatible bars per run after cable and load checks; no existing-kit fit is implied.
Send the tall-frame drawing, print sample, storage-door position and service-access plan for a sample layout and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Building a tall graphic lightbox beside storage at an ECOC Exhibition stand? Compare internal LED bars for printed company and solution graphics. All 26 Modules products are below.
Will a tall back-corner graphic stay evenly illuminated?
Test the full printed height in its actual frame. Inspect the top, lower corners and support shadows from both open aisles. Review the message beside nearby screens; uniform backlighting and readable artwork need separate checks.
How should lightbox wiring work beside a storage door?
Map the door swing, graphic-removal route and driver access. Keep connections clear of hinges and stored equipment. Label each frame section and test maintenance access without dismantling the demonstration area.
Compare LED lightbox sources
- 20W rigid edge-lit bar: DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics.
- Linkable edge-lit bars: DC24V, 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Can these modules illuminate or test optical communications equipment?
They are internal light sources for compatible printed display lightboxes. They are not optical-test equipment, transceiver components or screen electronics. Keep graphic-lightbox selection separate from the technical demonstration's lighting requirements.
Before ordering
Featured bars require separate DC24V constant-voltage supplies. Confirm load, polarity, connector pinout and cable capacity. Only the featured linkable family lists up to five compatible bars per run after cable and load checks; no existing-kit fit is implied.
Send the tall-frame drawing, print sample, storage-door position and service-access plan for a sample layout and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.