Domino Sign describes LED-integration training in France. This independent BOOTH LIGHTS selection helps signmakers choose edge-lit bars for their own lightbox trials. Purchasing these modules does not book a course or imply provider approval.
Choose the light bar before fixing the spacing
Measure the clear mounting run, face-to-bar depth and cable clearance. Compare the 470mm 12W/18W MODULAP format, the 470mm 20W rigid bar and the 200mm 7W compact bar. Use the final graphic and its intended mounting tension when evaluating the assembled lightbox.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can I copy a point-module spacing chart for an edge-lit bar?
No. These featured bars direct light from the frame edge and are not interchangeable with an array of point modules. Check the selected lens and its orientation relative to the graphic. Test the bar positions in the actual enclosure; matching voltage or length does not validate the layout.
Which beam angle should I compare for my lightbox?
The 12W/18W MODULAP module uses 9°×50° optics, the 20W rigid bar 10°×40°, and the standard 7W compact bar 20°×60°. Record which lens axis faces across the graphic. These are different distributions, not guarantees of uniform illumination at every depth.
Is the highest-wattage bar always the better purchase?
No. Check usable length, measured face appearance, connector fit and total load before selecting wattage. A 200mm bar may fit a short section that a 470mm bar cannot. Retain the approved model, CCT and orientation for repeat orders, and size the separate DC24V supply for the final quantity.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Domino Sign describes LED-integration training in France. This independent BOOTH LIGHTS selection helps signmakers choose edge-lit bars for their own lightbox trials. Purchasing these modules does not book a course or imply provider approval.
Choose the light bar before fixing the spacing
Measure the clear mounting run, face-to-bar depth and cable clearance. Compare the 470mm 12W/18W MODULAP format, the 470mm 20W rigid bar and the 200mm 7W compact bar. Use the final graphic and its intended mounting tension when evaluating the assembled lightbox.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can I copy a point-module spacing chart for an edge-lit bar?
No. These featured bars direct light from the frame edge and are not interchangeable with an array of point modules. Check the selected lens and its orientation relative to the graphic. Test the bar positions in the actual enclosure; matching voltage or length does not validate the layout.
Which beam angle should I compare for my lightbox?
The 12W/18W MODULAP module uses 9°×50° optics, the 20W rigid bar 10°×40°, and the standard 7W compact bar 20°×60°. Record which lens axis faces across the graphic. These are different distributions, not guarantees of uniform illumination at every depth.
Is the highest-wattage bar always the better purchase?
No. Check usable length, measured face appearance, connector fit and total load before selecting wattage. A 200mm bar may fit a short section that a 470mm bar cannot. Retain the approved model, CCT and orientation for repeat orders, and size the separate DC24V supply for the final quantity.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.