Searching for CeMAT Australia lightbox LED modules or LED bars for exhibition lightbox towers? Compare internal sources for printed intralogistics brand graphics beside your product demonstration.
Which LEDs suit printed lightbox tower faces?
Compare edge-lit and rear-backlight layouts for each intended illuminated face. Use the finished print, face material and usable depth; check the tower at the planned viewing distance.
How should corners and separate faces be checked?
Test the assembled tower for corner shadows and uneven faces. Check partitions, source positions and cable access with the builder; do not assume light from one cavity reaches another.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What tower and power details should I send?
Send tower sections, face dimensions, finished graphics, partitions, mounting space and supply details. These LEDs are printed-lightbox sources, not machine-vision lights, touchscreen parts or video-wall tiles.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with tower sections and printed faces to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for CeMAT Australia lightbox LED modules or LED bars for exhibition lightbox towers? Compare internal sources for printed intralogistics brand graphics beside your product demonstration.
Which LEDs suit printed lightbox tower faces?
Compare edge-lit and rear-backlight layouts for each intended illuminated face. Use the finished print, face material and usable depth; check the tower at the planned viewing distance.
How should corners and separate faces be checked?
Test the assembled tower for corner shadows and uneven faces. Check partitions, source positions and cable access with the builder; do not assume light from one cavity reaches another.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What tower and power details should I send?
Send tower sections, face dimensions, finished graphics, partitions, mounting space and supply details. These LEDs are printed-lightbox sources, not machine-vision lights, touchscreen parts or video-wall tiles.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with tower sections and printed faces to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.