Looking for British Motor Show lightbox LED modules? Compare internal sources for printed vehicle-brand graphics. A stand builder reports rear lightbox walls beside display cars at the show, separately from its video wall; these modules are for a specified physical lightbox.
Why does the car photo look different when the print is backlit?
The print material, ink, light transmission and LED colour temperature all affect the illuminated image. Compare the actual printed sample under the intended sources and hall light. A screen preview is not a reliable substitute for testing the finished backlit face.
Does a high-CRI LED guarantee the print matches the car paint?
No. A printed photograph and reflective car paint respond differently to light. Use verified source data as one selection input, then assess the printed face and vehicle together. More wattage does not correct the ink or guarantee a paint match; compare colour temperature before choosing output and quantity.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can I assume every dual-CCT bar offers continuous colour tuning?
No. Confirm each product’s specified colour-temperature options and required control arrangement. The featured dual-CCT bar has a defined pair of colour temperatures and needs external control; it is not a continuous RGB colour system. Check the selected product before designing the lightbox circuit.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your printed sample material, lightbox dimensions, preferred colour-temperature option and viewing conditions through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for British Motor Show lightbox LED modules? Compare internal sources for printed vehicle-brand graphics. A stand builder reports rear lightbox walls beside display cars at the show, separately from its video wall; these modules are for a specified physical lightbox.
Why does the car photo look different when the print is backlit?
The print material, ink, light transmission and LED colour temperature all affect the illuminated image. Compare the actual printed sample under the intended sources and hall light. A screen preview is not a reliable substitute for testing the finished backlit face.
Does a high-CRI LED guarantee the print matches the car paint?
No. A printed photograph and reflective car paint respond differently to light. Use verified source data as one selection input, then assess the printed face and vehicle together. More wattage does not correct the ink or guarantee a paint match; compare colour temperature before choosing output and quantity.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can I assume every dual-CCT bar offers continuous colour tuning?
No. Confirm each product’s specified colour-temperature options and required control arrangement. The featured dual-CCT bar has a defined pair of colour temperatures and needs external control; it is not a continuous RGB colour system. Check the selected product before designing the lightbox circuit.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your printed sample material, lightbox dimensions, preferred colour-temperature option and viewing conditions through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.