Looking for BICSI conference lightbox LED modules? Compare internal LED bars for illuminated graphics beside separate rack displays and demonstration equipment.
Which LEDs suit a graphic lightbox beside a rack display?
Select the source from the lightbox’s lit dimensions, clear depth, front material and mounting drawing. The lightbox and rack are separate systems; nearby demonstration hardware does not determine the graphic lighting layout.
Can I use rack demo connections to power the lightbox LEDs?
A matching plug alone does not establish compatibility. Verify the chosen bar’s input voltage, polarity, connector pinout and required power supply. Do not connect it to a network or rack outlet without confirming the electrical design.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What mounting and power information should I send?
Send the actual lightbox cross-section, mounting drawing, front sample and LED, connector and power labels. Identify separate demonstration equipment, retain access to the LED circuit and calculate the selected bar load.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your lightbox and electrical details to review internal LED bars separately from the rack demonstration hardware.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for BICSI conference lightbox LED modules? Compare internal LED bars for illuminated graphics beside separate rack displays and demonstration equipment.
Which LEDs suit a graphic lightbox beside a rack display?
Select the source from the lightbox’s lit dimensions, clear depth, front material and mounting drawing. The lightbox and rack are separate systems; nearby demonstration hardware does not determine the graphic lighting layout.
Can I use rack demo connections to power the lightbox LEDs?
A matching plug alone does not establish compatibility. Verify the chosen bar’s input voltage, polarity, connector pinout and required power supply. Do not connect it to a network or rack outlet without confirming the electrical design.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What mounting and power information should I send?
Send the actual lightbox cross-section, mounting drawing, front sample and LED, connector and power labels. Identify separate demonstration equipment, retain access to the LED circuit and calculate the selected bar load.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your lightbox and electrical details to review internal LED bars separately from the rack demonstration hardware.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.