Looking for BDIA Dental Showcase lightbox LED modules or LED bars for backlit exhibition counter graphics? Compare internal sources for printed reception and product-display counter fronts.
Which LEDs suit a backlit exhibition counter front?
Compare edge-lit and rear-backlight options with the actual printed face and usable lighting depth. Check mounting space and test the whole front, including areas beside internal dividers, before approving source positions.
Can storage or equipment space reduce the lighting cavity?
Yes. Counter storage, dividers and equipment fittings can leave less space for the graphic lightbox than the counter exterior suggests. Mark the lighting cavity separately on the section drawing and keep the intended light path and service opening accessible.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What counter sections should I send?
Send face dimensions and material, final graphic, lighting depth, dividers, mounting and service access, plus connector and supply details. Our modules illuminate display graphics; they are not dental treatment lamps or medical-equipment components.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your backlit counter sections to compare internal sources for the available lighting cavity.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for BDIA Dental Showcase lightbox LED modules or LED bars for backlit exhibition counter graphics? Compare internal sources for printed reception and product-display counter fronts.
Which LEDs suit a backlit exhibition counter front?
Compare edge-lit and rear-backlight options with the actual printed face and usable lighting depth. Check mounting space and test the whole front, including areas beside internal dividers, before approving source positions.
Can storage or equipment space reduce the lighting cavity?
Yes. Counter storage, dividers and equipment fittings can leave less space for the graphic lightbox than the counter exterior suggests. Mark the lighting cavity separately on the section drawing and keep the intended light path and service opening accessible.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What counter sections should I send?
Send face dimensions and material, final graphic, lighting depth, dividers, mounting and service access, plus connector and supply details. Our modules illuminate display graphics; they are not dental treatment lamps or medical-equipment components.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your backlit counter sections to compare internal sources for the available lighting cavity.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.