Building a custom lightbox exhibit for ASHP Midyear? This selection is for exhibit fabricators choosing internal LEDs for printed perimeter branding, especially when an island stand also contains meeting areas. Evaluate each illuminated face from its intended approach direction: one acceptable front photograph does not establish that the side graphics present the same logo and background consistently.
Approve each perimeter face as a separate illuminated sample
Create a face schedule showing graphic width and height, clear internal depth, edge-lit or backlit construction, bar orientation and intended viewing direction. Mark returns, corner junctions and internal braces. Compare a compact side face with a longer front face using the actual printed material; do not copy the same bar count or wattage simply because the graphics share a brand.
Review the joined display from the meeting area and aisle
Use the approved artwork and fixed exposure to photograph each face straight on and from its approach angle. Then assemble the adjoining sections and review the corner: a visible brightness change, dark join or exposed lens calls for a layout or face-material review. Include a seated viewing position if the graphic borders a meeting area. Match fixed CCT across continuous branding, and record separately any construction difference that changes the illuminated result.
Compare LED lightbox sources
- Linkable edge-lit bars: DC24V; 212mm/9W, 319mm/14W or 480mm/20W, with standard 20° × 60° optics. Select a length for each clear mounting section. Maximum five compatible bars per run depends on the actual cable and connector arrangement.
- 7W mini edge-lit bar: DC24V, 200 × 23 × 16mm, 770lm, standard 20° × 60° optics. Compare it for shorter return sections; a Molex 5557 / Mini-Fit Jr. family designation does not establish a matching connector pinout.
- 20W rigid edge-lit bar: DC24V, 470 × 24 × 16mm including the lens, 2200lm ±10%, 10° × 40° optics. Compare its light path with the usable cavity and brace locations. More output does not by itself establish even illumination.
Should every face of my ASHP Midyear lightbox use the same LED layout?
Use a consistent approved appearance, not an assumed identical layout. Width, depth, print transmission and internal supports can differ between faces. Prototype the shortest and longest sections and approve the joined corner before ordering repeated assemblies. If a complete rental exhibit is supplied, ask its owner who may service the lighting; these components do not establish replacement compatibility.
Will matching colour temperature make the front and return faces look equally bright?
No. Fixed CCT is one specification; face depth, print transmission, optics and mounting geometry also affect the result. Compare the assembled faces using the approved printed material and viewing positions. Record the selected model and fixed CCT for each face rather than substituting an unrelated bar with the same nominal colour temperature.
What should I send for a repeat-production quote for perimeter lightboxes?
Send a labelled drawing and quantity for each distinct face, including returns and corner joints, plus internal depth, printed-face material, driver load and connector details. Separate the number of complete frames from the number of bars required after prototyping. The product pack quantity is not an installation recipe.
Before ordering
Confirm a mechanical section drawing, printed-face sample, support positions, connector pinout and polarity. Use a compatible external DC24V constant-voltage driver sized for the actual load and permitted wiring runs. These are internal display-lighting parts, not pharmacy equipment or a complete exhibition stand.
Send the face schedule, corner details, internal depth, artwork sample and quantity for each face. Compare all 26 LED Modules products below for a prototype and production order. Tell us whether you need a custom source layout or a checked replacement, and include the existing driver and connector details for replacements.
Contact us · Shipping policy · Organizer information · Original display maker case
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Building a custom lightbox exhibit for ASHP Midyear? This selection is for exhibit fabricators choosing internal LEDs for printed perimeter branding, especially when an island stand also contains meeting areas. Evaluate each illuminated face from its intended approach direction: one acceptable front photograph does not establish that the side graphics present the same logo and background consistently.
Approve each perimeter face as a separate illuminated sample
Create a face schedule showing graphic width and height, clear internal depth, edge-lit or backlit construction, bar orientation and intended viewing direction. Mark returns, corner junctions and internal braces. Compare a compact side face with a longer front face using the actual printed material; do not copy the same bar count or wattage simply because the graphics share a brand.
Review the joined display from the meeting area and aisle
Use the approved artwork and fixed exposure to photograph each face straight on and from its approach angle. Then assemble the adjoining sections and review the corner: a visible brightness change, dark join or exposed lens calls for a layout or face-material review. Include a seated viewing position if the graphic borders a meeting area. Match fixed CCT across continuous branding, and record separately any construction difference that changes the illuminated result.
Compare LED lightbox sources
- Linkable edge-lit bars: DC24V; 212mm/9W, 319mm/14W or 480mm/20W, with standard 20° × 60° optics. Select a length for each clear mounting section. Maximum five compatible bars per run depends on the actual cable and connector arrangement.
- 7W mini edge-lit bar: DC24V, 200 × 23 × 16mm, 770lm, standard 20° × 60° optics. Compare it for shorter return sections; a Molex 5557 / Mini-Fit Jr. family designation does not establish a matching connector pinout.
- 20W rigid edge-lit bar: DC24V, 470 × 24 × 16mm including the lens, 2200lm ±10%, 10° × 40° optics. Compare its light path with the usable cavity and brace locations. More output does not by itself establish even illumination.
Should every face of my ASHP Midyear lightbox use the same LED layout?
Use a consistent approved appearance, not an assumed identical layout. Width, depth, print transmission and internal supports can differ between faces. Prototype the shortest and longest sections and approve the joined corner before ordering repeated assemblies. If a complete rental exhibit is supplied, ask its owner who may service the lighting; these components do not establish replacement compatibility.
Will matching colour temperature make the front and return faces look equally bright?
No. Fixed CCT is one specification; face depth, print transmission, optics and mounting geometry also affect the result. Compare the assembled faces using the approved printed material and viewing positions. Record the selected model and fixed CCT for each face rather than substituting an unrelated bar with the same nominal colour temperature.
What should I send for a repeat-production quote for perimeter lightboxes?
Send a labelled drawing and quantity for each distinct face, including returns and corner joints, plus internal depth, printed-face material, driver load and connector details. Separate the number of complete frames from the number of bars required after prototyping. The product pack quantity is not an installation recipe.
Before ordering
Confirm a mechanical section drawing, printed-face sample, support positions, connector pinout and polarity. Use a compatible external DC24V constant-voltage driver sized for the actual load and permitted wiring runs. These are internal display-lighting parts, not pharmacy equipment or a complete exhibition stand.
Send the face schedule, corner details, internal depth, artwork sample and quantity for each face. Compare all 26 LED Modules products below for a prototype and production order. Tell us whether you need a custom source layout or a checked replacement, and include the existing driver and connector details for replacements.
Contact us · Shipping policy · Organizer information · Original display maker case
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.