Alliance Franchise Brands Convention & Trade Show connects sign businesses and supplier partners. Browse all LED Modules for your own indoor lightbox and record exactly which sample configuration your order should match.
Identify the approved sample configuration
Record the product model, selected option, dimensions, lens, voltage and connectors. For dual-CCT bars, identify the selected CCT pair and control arrangement. Keep sample photos with the written specification.
Resolve substitutions before the production build
Compare the order details with the sample record. Ask about any changed option, lens or connector before confirming the build. A shared product name or similar photograph does not establish that the supplied configuration matches the sample.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a matching wattage prove two LED bars are interchangeable?
No. Check model, dimensions, optics, wiring and controls, then review the complete assembly. Confirm any proposed substitution against the agreed sample specification.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the sample record, selected product options, order details, differences and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Alliance Franchise Brands Convention & Trade Show connects sign businesses and supplier partners. Browse all LED Modules for your own indoor lightbox and record exactly which sample configuration your order should match.
Identify the approved sample configuration
Record the product model, selected option, dimensions, lens, voltage and connectors. For dual-CCT bars, identify the selected CCT pair and control arrangement. Keep sample photos with the written specification.
Resolve substitutions before the production build
Compare the order details with the sample record. Ask about any changed option, lens or connector before confirming the build. A shared product name or similar photograph does not establish that the supplied configuration matches the sample.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a matching wattage prove two LED bars are interchangeable?
No. Check model, dimensions, optics, wiring and controls, then review the complete assembly. Confirm any proposed substitution against the agreed sample specification.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the sample record, selected product options, order details, differences and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.