Searching for AIFIL LEDinnovationDay lightbox LED modules or LED bars for slim lightboxes? Compare internal sources for shallow illuminated sign and display frames.
Which LEDs suit a slim lightbox?
Compare edge-lit and rear-backlight layouts using the actual face material and usable cavity. Allow space for the lens, connectors and mounting, then test with the finished graphic.
Does fitting the frame guarantee even light?
No. A bar may fit physically yet show bright spots or dark bands behind the face. Check source orientation, spacing and distance to the graphic in an assembled sample before ordering.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What shallow-frame details should I send?
Send frame sections, face dimensions and material, finished graphics, mounting space and supply details. A different LED model requires its own layout and load calculation; do not reuse another manufacturer's software result as a fit guarantee.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your slim-frame section and graphic sample to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for AIFIL LEDinnovationDay lightbox LED modules or LED bars for slim lightboxes? Compare internal sources for shallow illuminated sign and display frames.
Which LEDs suit a slim lightbox?
Compare edge-lit and rear-backlight layouts using the actual face material and usable cavity. Allow space for the lens, connectors and mounting, then test with the finished graphic.
Does fitting the frame guarantee even light?
No. A bar may fit physically yet show bright spots or dark bands behind the face. Check source orientation, spacing and distance to the graphic in an assembled sample before ordering.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What shallow-frame details should I send?
Send frame sections, face dimensions and material, finished graphics, mounting space and supply details. A different LED model requires its own layout and load calculation; do not reuse another manufacturer's software result as a fit guarantee.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your slim-frame section and graphic sample to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.