Planning illuminated category headers for an AIA Conference on Architecture & Design booth? Compare internal LED bars for printed wayfinding lightboxes that direct visitors to product and demonstration areas. All 26 Modules products are available below.
How do I keep product-category headers readable from the aisle?
Test the actual printed label in a working header at the planned viewing height and distance. Check letter contrast, uniformity and shadows from supports. More light alone cannot fix small type, poor contrast or an obstructed sightline.
How should I plan several separate header lightboxes?
Measure each enclosure and map its LED layout, wiring and accessible disconnection point. Check long and short headers individually rather than copying one spacing rule. Keep driver replacement access clear of display hardware and product samples.
Compare LED lightbox sources
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics for testing shorter header cavities.
- 10W slim edge-lit bar: DC24V, 360×23×16mm including lens, 1100lm, 9°×50° optics.
- 20W rigid edge-lit bar: DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics.
Are these LEDs architectural luminaires or digital-signage parts?
These selections illuminate compatible printed lightbox graphics. They do not replace architectural fixtures, demonstration equipment or screen electronics. Confirm each header's structure and mounting arrangement before choosing a bar.
Before ordering
The featured bars need separate DC24V constant-voltage supplies. Verify load, cable rating, connector pinout and polarity. Only the featured 10W slim model lists up to six compatible bars per run, subject to installation checks; do not apply that limit to every model.
Send header drawings, category artwork, viewing height, enclosure depth and service-access details for a layout review and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Planning illuminated category headers for an AIA Conference on Architecture & Design booth? Compare internal LED bars for printed wayfinding lightboxes that direct visitors to product and demonstration areas. All 26 Modules products are available below.
How do I keep product-category headers readable from the aisle?
Test the actual printed label in a working header at the planned viewing height and distance. Check letter contrast, uniformity and shadows from supports. More light alone cannot fix small type, poor contrast or an obstructed sightline.
How should I plan several separate header lightboxes?
Measure each enclosure and map its LED layout, wiring and accessible disconnection point. Check long and short headers individually rather than copying one spacing rule. Keep driver replacement access clear of display hardware and product samples.
Compare LED lightbox sources
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics for testing shorter header cavities.
- 10W slim edge-lit bar: DC24V, 360×23×16mm including lens, 1100lm, 9°×50° optics.
- 20W rigid edge-lit bar: DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics.
Are these LEDs architectural luminaires or digital-signage parts?
These selections illuminate compatible printed lightbox graphics. They do not replace architectural fixtures, demonstration equipment or screen electronics. Confirm each header's structure and mounting arrangement before choosing a bar.
Before ordering
The featured bars need separate DC24V constant-voltage supplies. Verify load, cable rating, connector pinout and polarity. Only the featured 10W slim model lists up to six compatible bars per run, subject to installation checks; do not apply that limit to every model.
Send header drawings, category artwork, viewing height, enclosure depth and service-access details for a layout review and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.