Searching for Accountex London lightbox LED modules or LED bars for exhibition lightbox walls? Compare internal sources for printed branding beside accounting-software demonstrations.
Which LEDs suit exhibition lightbox walls?
Compare edge-lit and rear-backlight layouts with the actual printed fabric and usable frame depth. Test the brand graphics at the planned demonstration positions.
Will the wall create reflections at demo screens?
Check the illuminated wall and screens together from seated and standing visitor positions. Review screen angle and wall brightness with the builder; adding LED output alone may not improve the demo.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What wall and demo-area details should I send?
Send wall dimensions, finished graphics, frame sections, screen positions, mounting space and supply details. Confirm separate access to wall wiring and demo equipment.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your lightbox wall and demo-area layout to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for Accountex London lightbox LED modules or LED bars for exhibition lightbox walls? Compare internal sources for printed branding beside accounting-software demonstrations.
Which LEDs suit exhibition lightbox walls?
Compare edge-lit and rear-backlight layouts with the actual printed fabric and usable frame depth. Test the brand graphics at the planned demonstration positions.
Will the wall create reflections at demo screens?
Check the illuminated wall and screens together from seated and standing visitor positions. Review screen angle and wall brightness with the builder; adding LED output alone may not improve the demo.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What wall and demo-area details should I send?
Send wall dimensions, finished graphics, frame sections, screen positions, mounting space and supply details. Confirm separate access to wall wiring and demo equipment.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your lightbox wall and demo-area layout to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.