Looking for AAPEX lightbox LED modules or LED bars for backlit booth signs? Compare internal sources for graphic lightboxes beside separate raised logos and opaque stand panels.
Which LEDs suit AAPEX lightbox graphics?
Compare edge-lit and rear-backlight layouts with the actual face material, finished graphic and usable depth. Assess lightbox brightness and print uniformity separately from the raised-logo effect.
Can a raised-logo layout be used behind a printed face?
Do not assume so. A layout intended to trace or halo-light a logo can show distinct bright areas behind a broad graphic. Test the lightbox with its own source spacing and orientation before choosing.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What lightbox and logo-section details should I send?
Send the lightbox face dimensions and material, frame sections, mounting space and supply specifications. Identify the raised-logo construction separately; our modules illuminate display graphics and are not vehicle lamps or automotive retrofit parts.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your graphic lightbox details to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for AAPEX lightbox LED modules or LED bars for backlit booth signs? Compare internal sources for graphic lightboxes beside separate raised logos and opaque stand panels.
Which LEDs suit AAPEX lightbox graphics?
Compare edge-lit and rear-backlight layouts with the actual face material, finished graphic and usable depth. Assess lightbox brightness and print uniformity separately from the raised-logo effect.
Can a raised-logo layout be used behind a printed face?
Do not assume so. A layout intended to trace or halo-light a logo can show distinct bright areas behind a broad graphic. Test the lightbox with its own source spacing and orientation before choosing.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What lightbox and logo-section details should I send?
Send the lightbox face dimensions and material, frame sections, mounting space and supply specifications. Identify the raised-logo construction separately; our modules illuminate display graphics and are not vehicle lamps or automotive retrofit parts.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your graphic lightbox details to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.