Picking up a fabric lightbox from 6ix Signs? Its lightbox page describes showroom pickup with setup instruction. Compare independent internal LEDs for your own design and confirm supplier services directly.
Can pull-over fabric and SEG lightboxes use the same LED layout?
Do not assume so. A fabric sleeve and a graphic tucked into a frame can have different internal spacing and obstructions. Compare the actual construction, light direction and printed material before selecting bars.
How should I record wiring before dismantling a portable lightbox?
Disconnect the supply first. Photograph connector positions and label matching leads, polarity and bar locations according to the maker’s instructions. Keep records with the display so reassembly follows the verified layout.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does showroom setup instruction confirm compatibility with these modules?
No. Supplier instruction concerns its supplied display. For an independent build, check the selected LED’s supply, connectors, polarity and mounting; no retrofit approval or supplier affiliation is claimed.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your sleeve or SEG frame construction, internal dimensions and connector photos through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Picking up a fabric lightbox from 6ix Signs? Its lightbox page describes showroom pickup with setup instruction. Compare independent internal LEDs for your own design and confirm supplier services directly.
Can pull-over fabric and SEG lightboxes use the same LED layout?
Do not assume so. A fabric sleeve and a graphic tucked into a frame can have different internal spacing and obstructions. Compare the actual construction, light direction and printed material before selecting bars.
How should I record wiring before dismantling a portable lightbox?
Disconnect the supply first. Photograph connector positions and label matching leads, polarity and bar locations according to the maker’s instructions. Keep records with the display so reassembly follows the verified layout.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does showroom setup instruction confirm compatibility with these modules?
No. Supplier instruction concerns its supplied display. For an independent build, check the selected LED’s supply, connectors, polarity and mounting; no retrofit approval or supplier affiliation is claimed.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your sleeve or SEG frame construction, internal dimensions and connector photos through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.