A booth light, the LEDs inside a lightbox and the bracket holding a fixture solve different parts of the same display. These records from our Production & Dispatch journal show what to compare before ordering for a U.S. project.
Look at the light on a finished display
Our 25W installation record shows arm lights above graphics and glass showcases. Look at the print and the reflections together. The 25W Tri-CCT light in Silver with US Plug offers three selectable white settings; check the frame dimensions before choosing the mount.
The 35W testing video shows another fixture during testing. Compare the 35W multi-mount light in Silver, 4500K–5000K, with US Plug when its fixed white-light option and mounting choices suit the job. A workshop video is useful evidence of the recorded setup; approve coverage with your own graphic and mounting position.
A U.S. lightbox sample starts with the inside dimensions
A U.S. customer requested samples for a custom lightbox project using our 20W rigid LED bar as the product reference. The bar is an internal edge-lighting source, not a complete sign. Its 470mm length and DC24V supply requirement belong in the drawing; a compatible external driver is sold separately.

Our published 20W inspection record describes color-consistency and light-leakage checks. For your trial, send the cavity depth, face material and wiring details, then agree the sample appearance before a production order. Compare compact bars, long bars or linkable bars according to the actual layout.
Order the mounting interface, not just “a clamp”
This mounting-bracket packing record documents separately ordered accessories. For the featured dual M8 bracket, compare fixing-hole spacing, bolt length, frame channel and supported load. An M8 thread alone does not establish fit.

Use the mounting systems range to identify a candidate. Send a photo of the light's rear base and a measured frame profile. If the booth uses pipe and drape, identify the actual supporting member and permitted fixing point; do not assume the drape rail can carry a light.
Make the quotation specific
Send the product links, quantities, frame photos and display dimensions, together with the U.S. ZIP code, required arrival date and receiving address type: your workshop, an advance warehouse or the show site. Include the selected plug and any requested model-label documents. Confirm power and installation requirements in the current exhibitor manual.
Browse Trade Show Lighting, LED Lightbox Modules and Mounting Systems. The installation, testing and packing examples describe their own recorded jobs; only the sample project above is identified here as a U.S. customer project.
Watch the workshop records
Download the English buyer packs
Keep a short selection sheet with your project drawing. Each PDF links to current product pages and lists the information needed for a specific quotation.
- Trade Show Lighting: US Plug options, testing records and a quotation brief (English PDF)
- LED Lightbox Modules: internal light sources, power and sample details (English PDF)
- Mounting Systems: frame measurements, interfaces and accessory selection (English PDF)
Send the selected product links, drawings and quantities with the U.S. ZIP code and required arrival date.
Keep the sample decision with the next order
After trying a light, internal lightbox bar or mounting part, record the exact model and variant, sample findings and agreed configuration. The fillable sample-review and repeat-order record (English PDF) keeps those references together and makes changes in a later order easier to review.
Still defining the project? Start with the booth-lighting handoff sheet (English) or lightbox enquiry worksheet (English). Save a completed copy locally, then contact us with your model links, quantities and open questions. The PDF does not send itself.