Sign, Print & Promotion Norway serves sign makers, manufacturers and installers. Define the required white-light behavior before ordering a lightbox control system. Browse the full LED Modules range below.
Separate white-light choice from brightness control
Ordering a fixed white-light range does not make the bar tunable white. List the selected model and CCT separately from the required dimming behavior. Confirm the driver and control interface before promising an adjustment range to your client.
Test the lowest usable brightness before approval
For the highlighted 12W dual-angle bar, brightness reduces to approximately 50%, then the module switches off. It does not dim smoothly to zero. Check the actual bar, driver and control together, and record the minimum stable setting for the finished sign.
Compare LED lightbox sources
- 12W dual-angle edge-lit bar: 517mm, DC24V, 1200lm, 15°×45° lens and 3-pin connection; verify the stated dimming limit.
- 18W edge-lit bar: 585mm, DC24V, 1800lm and 14°×50° lens; fixed white-light options.
- 13W edge-lit bar: 360mm, DC24V, 1430lm, 15°×60° lens and Molex 5557 / Mini-Fit Jr. family connection.
Does a 3-pin connector mean a selectable white-light channel?
No. Pin count alone does not define the control function. The listed 12W bar has fixed white-light options; verify its pinout and the intended control interface instead of inferring tunable white from the connector.
Before ordering
These are internal sources, not complete signs. Verify DC24V power, polarity, wiring and load. The 13W bar allows at most 6 per run after electrical checks; that limit does not cover other models. Confirm drivers and controls separately and request any required model-specific compliance documents.
Send the frame dimensions, bar model, selected white-light range, driver details and required brightness behavior through our contact page for a control-specification review.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Sign, Print & Promotion Norway serves sign makers, manufacturers and installers. Define the required white-light behavior before ordering a lightbox control system. Browse the full LED Modules range below.
Separate white-light choice from brightness control
Ordering a fixed white-light range does not make the bar tunable white. List the selected model and CCT separately from the required dimming behavior. Confirm the driver and control interface before promising an adjustment range to your client.
Test the lowest usable brightness before approval
For the highlighted 12W dual-angle bar, brightness reduces to approximately 50%, then the module switches off. It does not dim smoothly to zero. Check the actual bar, driver and control together, and record the minimum stable setting for the finished sign.
Compare LED lightbox sources
- 12W dual-angle edge-lit bar: 517mm, DC24V, 1200lm, 15°×45° lens and 3-pin connection; verify the stated dimming limit.
- 18W edge-lit bar: 585mm, DC24V, 1800lm and 14°×50° lens; fixed white-light options.
- 13W edge-lit bar: 360mm, DC24V, 1430lm, 15°×60° lens and Molex 5557 / Mini-Fit Jr. family connection.
Does a 3-pin connector mean a selectable white-light channel?
No. Pin count alone does not define the control function. The listed 12W bar has fixed white-light options; verify its pinout and the intended control interface instead of inferring tunable white from the connector.
Before ordering
These are internal sources, not complete signs. Verify DC24V power, polarity, wiring and load. The 13W bar allows at most 6 per run after electrical checks; that limit does not cover other models. Confirm drivers and controls separately and request any required model-specific compliance documents.
Send the frame dimensions, bar model, selected white-light range, driver details and required brightness behavior through our contact page for a control-specification review.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.