Building fabric lightboxes for Natural Products Expo West? Compare internal LED bars for branded backwalls alongside unlit graphics. Select by the real print and frame, then browse all 26 Modules products below.
How can lit and unlit brand graphics look consistent?
Compare physical prints together under the intended ambient light and backlighting. Review brand colors, white areas and dark backgrounds. A shared wattage or color temperature cannot guarantee a match; approve the combined appearance before buying quantities.
Should I use edge-lit bars or LEDs behind the fabric?
Measure internal depth, usable edge length and LED-to-fabric clearance. Edge-lit bars direct light inward; the featured dual-CCT bar provides direct rear backlighting. Test one complete graphic section for bright edges, shadows and color differences.
Compare LED lightbox sources
- 12W dual-CCT rear-backlighting bar: DC24V, 1320lm, 180° optics and 3-wire JST. Select the required two-white-tone variant.
- Linkable edge-lit bars: DC24V, 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Can the same LEDs also light raised logos and counter trim?
Treat fabric backlighting, raised-logo highlights and counter decoration as separate optical and electrical tasks. These are internal lightbox components; no fit with an exhibitor's existing kit is implied.
Before ordering
The featured bars require separate DC24V constant-voltage supplies. The dual-CCT model needs a compatible 3-wire switch/controller, also separate. The linkable family allows up to five compatible bars per run after cable, polarity and load checks; this is not a limit for all products.
Send frame drawings, fabric print samples, lit/unlit graphic positions and connector details for a sample layout and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Building fabric lightboxes for Natural Products Expo West? Compare internal LED bars for branded backwalls alongside unlit graphics. Select by the real print and frame, then browse all 26 Modules products below.
How can lit and unlit brand graphics look consistent?
Compare physical prints together under the intended ambient light and backlighting. Review brand colors, white areas and dark backgrounds. A shared wattage or color temperature cannot guarantee a match; approve the combined appearance before buying quantities.
Should I use edge-lit bars or LEDs behind the fabric?
Measure internal depth, usable edge length and LED-to-fabric clearance. Edge-lit bars direct light inward; the featured dual-CCT bar provides direct rear backlighting. Test one complete graphic section for bright edges, shadows and color differences.
Compare LED lightbox sources
- 12W dual-CCT rear-backlighting bar: DC24V, 1320lm, 180° optics and 3-wire JST. Select the required two-white-tone variant.
- Linkable edge-lit bars: DC24V, 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Can the same LEDs also light raised logos and counter trim?
Treat fabric backlighting, raised-logo highlights and counter decoration as separate optical and electrical tasks. These are internal lightbox components; no fit with an exhibitor's existing kit is implied.
Before ordering
The featured bars require separate DC24V constant-voltage supplies. The dual-CCT model needs a compatible 3-wire switch/controller, also separate. The linkable family allows up to five compatible bars per run after cable, polarity and load checks; this is not a limit for all products.
Send frame drawings, fabric print samples, lit/unlit graphic positions and connector details for a sample layout and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.