10W Edge-Lit LED Rigid Bar for Lightboxes

FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar

3000–3500K / 10-Pack

$199.00

Pack of 10 $19.90 each

FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar

$199.00

Pack of 10 $19.90 each

Color Temperature (CCT) 3000–3500K 4200–4700K 6500–7000K

Pack Size 10-Pack 50-Pack 100-Pack

FOGA SYSTEM 10W LED Module for Edge-Lit Lightbox Frames

This 10W LED module for FOGA SYSTEM-type display lighting is designed for edge lighting in compatible fabric light boxes, exhibition graphics and illuminated aluminum frames. The rigid bar produces 1,100lm from DC24V and uses an elliptical lens to send light inward from the frame perimeter.

Before ordering: Confirm the module dimensions, DC24V input, connector pinout, polarity, mounting space and optical direction against your existing installation. The displayed price follows the selected 10-, 50- or 100-bar pack. Power supply, wiring, frame and graphic are not included unless stated in the selected option.

Key Specifications

Product type	Side-lit / edge-lit rigid LED lightbox module
Intended system	Compatible FOGA SYSTEM-type fabric light boxes and display frames
Power	10W per bar
Luminous flux	1,100lm per bar
Dimensions	36cm bar length; 23 × 16mm overall profile, including the lens
Input Voltage	DC24V
Color rendering	CRI 90+
Optics	Standard 20° × 60° elliptical lens. Optional 14° × 47° or 9° × 50° lenses are available by request; please email us if you need one of these optional lenses.
Connector	Molex 5557-form plug; verify pinout and polarity
Fixed CCT options	3000–3500K / 4200–4700K / 6500–7000K
Mounting	Rigid aluminum bar; confirm mounting hardware for the frame
Published certification marks	UL, ETL, CE, RoHS, SAA, UKCA
Rated lifespan	50,000 hours
Pack sizes	10, 50 or 100 bars

For FOGA SYSTEM Light Boxes and Exhibition Displays

FOGA SYSTEM produces fabric light boxes and display frames that use this type of edge-lit LED bar. This product is offered for customers looking for a compatible module for that type of application, including building, servicing or replacing lighting in compatible frames. It can also be considered for other SEG light boxes only after the complete mechanical and electrical specification has been checked.

This is an edge-lighting bar, not a rear-facing direct-backlight module. Install multiple bars along selected inner frame edges with the lenses aimed across the graphic. The required quantity and spacing depend on the light box dimensions, frame depth, illuminated width, fabric transmission, reflective surfaces and target uniformity.

Compatibility Checks Before Purchase

Measure the available mounting length, width and depth inside the frame.
Confirm DC24V constant-voltage operation and calculate the total load at 10W per bar.
Compare the mating connector, pin assignment and polarity; a similar connector shell does not guarantee identical wiring.
Check lens direction and clearance for the cable and mounting hardware.
Determine the required number and spacing of bars based on the actual frame and graphic, then test the layout before fixing the production quantity.

A compatible external DC24V constant-voltage power supply is required. Select the driver, cable and feed arrangement for the complete connected load with suitable design margin and voltage-drop control.

Questions Buyers Ask

Is this a FOGA SYSTEM LED module?

It is a 10W edge-lit module for the same type of display-lighting application used in FOGA SYSTEM light boxes. Confirm dimensions, voltage, connector, polarity and mounting details for the specific system before ordering.