Booth Lighting for SPS Industrial Automation Exhibitors
Plan clearer automation demonstrations and technical displays for SPS at NürnbergMesse. These independent LED booth-lighting options help exhibitors present PLCs, sensors, drives, motors, robots, HMIs, industrial communication systems, control cabinets and technical graphics to engineers and purchasing teams.
Use these lights for exhibition equipment, graphics, products and demonstration areas. They are not machine-vision illuminators, robot-cell safety devices, task lights, warning lights or functional machine lighting.
Choose by what visitors need to understand
| Automation display task | Recommended starting point | Why it helps |
|---|---|---|
| Robot cell or motion demo beside a process graphic | 25W 3250lm linkable linear arm light | Long, wide coverage keeps the moving equipment and adjacent explanation visually connected. |
| Control cabinet, drives, sensors or mixed material finishes | 25W Tri-CCT black or white linear arm light | Test 3000K, 4500K or 6000K under hall lighting and match the housing to the stand. |
| HMI, touchscreen, industrial PC or software demonstration | 25W adjustable Tri-CCT clamp light | Reposition the light to limit screen reflections while keeping the operator area visible. |
| Small sensor, connector, actuator or precision component | 18W focused-beam CRI90+ display light | Concentrated illumination helps a compact product and its physical details stand out. |
| Tall automation cell, high brand wall or island booth | 35W high-output multi-mount arm light | Additional output supports higher display positions after mounting, spacing and electrical load are confirmed. |
| Tall automation wall, wide process graphic or large island stand | 50W Tri-CCT linkable light, 5500lm | Use the higher-output option when a tested layout needs broader or brighter coverage under strong hall lighting. |
Common automation-booth lighting problems
- Moving equipment repeatedly blocks the light: use multiple mounting positions and test the complete demo cycle before final aiming.
- The robot is visible but the process explanation is dark: illuminate the equipment edge and nearby workflow graphic as one visitor journey.
- HMI screens reflect the fixture: check the likely eye level and camera angle, then tilt the light away from direct reflections.
- Small sensors and connectors disappear inside a large installation: place focused light close to the component and label instead of increasing whole-booth wattage.
- The standard clamp does not fit the automation-frame profile: confirm profile shape, mounting surface, opening and load before ordering. Custom fixture options are available for suitable projects.
Plan the Nuremberg installation
Review the current SPS and NürnbergMesse stand-construction rules, approved stand plan and ExhibitorShop requirements before selecting mounting points or routing cables. Event dates, deadlines and venue rules can change, so confirm them on the official exhibitor website.
Confirm the required EU plug, supply voltage, circuit capacity, cable routing, safe clearance from moving equipment and permitted fixing points with your stand builder or authorized technical service provider. For the 25W Tri-CCT linear model, the standard arm is 400mm; 500mm, 600mm and 700mm arms can be requested. Its head rotates up to 359° and tilts from 0° to 90°. Linkable quantity depends on the exact model, power supply and installation conditions.
Send your stand width, frame profile, equipment height, demo movement range and photos for a practical starting recommendation. Prices include worldwide shipping and duties.
BoothLights is an independent lighting supplier and is not affiliated with or endorsed by SPS, Mesago Messe Frankfurt or NürnbergMesse.
Booth Lighting for SPS Industrial Automation Exhibitors
Plan clearer automation demonstrations and technical displays for SPS at NürnbergMesse. These independent LED booth-lighting options help exhibitors present PLCs, sensors, drives, motors, robots, HMIs, industrial communication systems, control cabinets and technical graphics to engineers and purchasing teams.
Use these lights for exhibition equipment, graphics, products and demonstration areas. They are not machine-vision illuminators, robot-cell safety devices, task lights, warning lights or functional machine lighting.
Choose by what visitors need to understand
| Automation display task | Recommended starting point | Why it helps |
|---|---|---|
| Robot cell or motion demo beside a process graphic | 25W 3250lm linkable linear arm light | Long, wide coverage keeps the moving equipment and adjacent explanation visually connected. |
| Control cabinet, drives, sensors or mixed material finishes | 25W Tri-CCT black or white linear arm light | Test 3000K, 4500K or 6000K under hall lighting and match the housing to the stand. |
| HMI, touchscreen, industrial PC or software demonstration | 25W adjustable Tri-CCT clamp light | Reposition the light to limit screen reflections while keeping the operator area visible. |
| Small sensor, connector, actuator or precision component | 18W focused-beam CRI90+ display light | Concentrated illumination helps a compact product and its physical details stand out. |
| Tall automation cell, high brand wall or island booth | 35W high-output multi-mount arm light | Additional output supports higher display positions after mounting, spacing and electrical load are confirmed. |
| Tall automation wall, wide process graphic or large island stand | 50W Tri-CCT linkable light, 5500lm | Use the higher-output option when a tested layout needs broader or brighter coverage under strong hall lighting. |
Common automation-booth lighting problems
- Moving equipment repeatedly blocks the light: use multiple mounting positions and test the complete demo cycle before final aiming.
- The robot is visible but the process explanation is dark: illuminate the equipment edge and nearby workflow graphic as one visitor journey.
- HMI screens reflect the fixture: check the likely eye level and camera angle, then tilt the light away from direct reflections.
- Small sensors and connectors disappear inside a large installation: place focused light close to the component and label instead of increasing whole-booth wattage.
- The standard clamp does not fit the automation-frame profile: confirm profile shape, mounting surface, opening and load before ordering. Custom fixture options are available for suitable projects.
Plan the Nuremberg installation
Review the current SPS and NürnbergMesse stand-construction rules, approved stand plan and ExhibitorShop requirements before selecting mounting points or routing cables. Event dates, deadlines and venue rules can change, so confirm them on the official exhibitor website.
Confirm the required EU plug, supply voltage, circuit capacity, cable routing, safe clearance from moving equipment and permitted fixing points with your stand builder or authorized technical service provider. For the 25W Tri-CCT linear model, the standard arm is 400mm; 500mm, 600mm and 700mm arms can be requested. Its head rotates up to 359° and tilts from 0° to 90°. Linkable quantity depends on the exact model, power supply and installation conditions.
Send your stand width, frame profile, equipment height, demo movement range and photos for a practical starting recommendation. Prices include worldwide shipping and duties.
BoothLights is an independent lighting supplier and is not affiliated with or endorsed by SPS, Mesago Messe Frankfurt or NürnbergMesse.