LED-lichtbalk met optische lens voor lichtbakken
LED-lichtbalk met optische lens voor lichtbakken
BOOTH LIGHTS' LED Light Bars with Optical Lens are precision-engineered for SEG-textiellichtbakken, backlit signage, and commercial display cabinets. Unlike standard LED strips, our High-Power LED Strips with Lens incorporate a secondary optical lens over each LED chip — controlling the beam angle and het licht precies naar de gewenste plaats te richten for maximum panel uniformity.
Waarom een optische lens belangrijk is voor LED-modules in lichtbakken
A bare LED emits light in a wide, uncontrolled pattern. Without a lens, light from a een aan de zijkant gemonteerde balk het licht ongelijkmatig verspreidt, creating bright zones near the LEDs and dark areas toward the center of the panel. Our LED-modules met asymmetrische lens solve this by reshaping the beam into a precise asymmetric pattern — typically 9°×50° or 15°×60° — that floods the diffusion panel evenly from edge to edge.
Het resultaat: uniformiteitsratio's boven 85% across the entire lightbox face, even in shallow-depth frames where standard modules would show hot spots.
Belangrijkste kenmerken
- Asymmetrische optische lens — 9°×50° or 15°×60° beam for precise panel coverage
- LED-chips met hoge lichtopbrengst — up to 1300lm per bar (13W) for bright, vivid graphics
- DC24V constante spanning — compatible with standard 24V LED drivers
- CRI90+ — nauwkeurige kleurweergave voor merkkritische graphics
- Dimbaar — 0–10V and PWM dimming compatible
- ETL Listed / CE-gecertificeerd — approved for US, Canadian, and European markets
- Stijve aluminium PCB — uitstekende warmteafvoer voor een lange levensduur
Productassortiment: LED-lichtbalken met optische lens
- 13W LED Light Bar with Optical Lens – DC24V, 1300lm, 15°×60° Asymmetric Lens
- 7W LED Lightbox Module with Optical Lens – DC24V, Side Lighting for Signage
- 6W Side-Lit LED Module with Lens – DC24V, 9°×50° Lens, Peel & Stick
- 7W LED Edge-Lit Bar with Lens – DC24V, ETL/CE Listed
Wat is een LED-module met asymmetrische lens?
An Asymmetric Lens LED Module uses a lens profile that is not symmetrical around the optical axis. Instead of projecting light equally in all directions, the lens concentrates the beam in one direction — toward the center of the lightbox panel — while limiting light loss toward the frame. This is the most efficient design for edge-lit and side-lit lightbox applications, where the LED bar is mounted at the perimeter and must illuminate a panel that extends only in one direction from the light source.
Toepassingen
- SEG-textiellichtbakken — trade show backwalls, hanging banners, counters
- Backlit-signagepanelen — retail, airport, hotel, and corporate environments
- Displaykasten — jewelry, cosmetics, and luxury retail showcases
- Verlichting voor billboards en reclamekasten — outdoor and indoor advertising displays
Gerelateerde collecties
Veelgestelde vragen
Wat is een LED-lichtbalk met optische lens?
An LED Light Bar with Optical Lens is a rigid LED bar where each LED chip is covered by a precision-molded secondary lens. The lens controls the beam angle and direction, improving light uniformity across the lightbox panel compared to bare LED strips.
Welke stralingshoek hebben jullie LED-balken met optische lens?
Onze LED-lichtbalken met optische lens are available in 9°×50° and 15°×60° asymmetric beam profiles. De smalle hoek (9°) controls light spread along the bar length, while de brede hoek (50°–60°) projects light across the panel depth.
What is an asymmetric lens LED module?
An asymmetric lens LED module uses a non-symmetrical optical lens that directs light preferentially toward the lightbox panel rather than equally in all directions. This maximizes efficiency and uniformity for edge-lit and side-lit lightbox applications.
Heb ik een optische lens nodig voor mijn lichtbak?
Als uw lichtbak ondiep is (depth under 3 inches / 75mm), an optical lens is sterk aanbevolen. Without a lens, you will see zichtbare hotspots bij de LED-balken. With an asymmetric lens, uniformiteitsratio's boven 85% are achievable even in very shallow frames.
Welke spanning gebruiken jullie LED-lichtbalken met optische lens?
All our optical lens LED light bars operate at DC24V constante spanning, compatible with standard 24V LED power supplies.
Zijn jullie LED-modules met optische lens ETL Listed?
Yes. Onze LED-lichtbalken met optische lens are ETL Listed voor de Amerikaanse en Canadese markt en CE-gecertificeerd voor de Europese markt.
Kan ik LED-lichtbalken met optische lens dimmen?
Yes. Our optical lens LED bars support 0–10V and PWM dimming, allowing brightness adjustment for different ambient lighting environments.
Kies de juiste LED-lichtbalk met optische lens voor uw project
Need help selecting the right wattage, beam angle, and quantity of LED Light Bars with Optical Lens for your lightbox dimensions? Our team supports exhibitors, sign companies, and display manufacturers with custom specifications.