Verlichting voor eilandstands op beurzen

Verlichting voor eilandstands op beurzen

Island booths are open on all four sides — no backwall, no defined front. Bezoekers komen uit alle richtingen, dus uw verlichting moet 360° werken. This guide covers how to light a 20×20 or larger island booth for maximale zichtbaarheid, gelijkmatige dekking en naleving van de eisen van Amerikaanse locaties.

⚡ Eilandstandverlichting in één oogopslag

  • 20×20 eilandstand: 8–12 lights recommended
  • Beste wattage: koppelbare 50W-armaturen
  • Belangrijk voordeel: Verbind maximaal 6 lampen per stopcontact in een daisy-chain — critical for island booths with limited floor drops
  • Dekkingsstrategie: Verlicht alle vier zijden afzonderlijk; gebruik een bovenliggende truss of montage aan het perimeterframe
  • Certificering: Veel Amerikaanse evenementen vragen om gecertificeerde apparatuur; controleer het gekozen model en de actuele beursregels

Waarom eilandstands het moeilijkst te verlichten zijn

Island booths present three challenges that inline booths don’t: (1) no backwall to anchor lights to, (2) visitors approaching from all four sides, and (3) limited floor power drops — typically 1–2 outlets for a 20×20 space. Under-lit island booths look empty and uninviting, even when the design is strong.

De oplossing is perimeterverlichting: mount arm lights on the outer frame or truss of the booth structure, facing inward and downward, covering all four sides. Daisy-chaining is essentieel — running individual power cords to each light is impractical and often violates venue rules.

⚠ Planning van stroomaansluitingen: Most 20×20 eilandstand booths at major US venues receive 1–2 floor power drops. Bij 8–12 lampen is daisy-chaining geen optie maar noodzakelijk. Our 50W linkable arm light chains up to 6 units per outlet, meaning a een volledige opstelling met 12 lampen heeft slechts 2 stroomaansluitingen nodig.

Aanbevolen producten voor eilandstands

★ Beste keuze

50W Linkable LED Arm Light (ETL)

5500lm, daisy chain up to 6. The only arm light in our lineup with the output and linkability needed for a full island booth setup.

Bekijk 50W →
Productzones

21W Linkable LED Arm Light

Chain up to 10 units. Use for interior product display zones, shelving, or demo stations within the island footprint.

Bekijk 21W →
Brede spreiding

21W LED Flood Light (120°)

120° wide beam for general area illumination. Use to fill the center of the island or wash large graphic panels.

Bekijk floodlight →

Eilandstandverlichting per formaat

Standformaat Benodigde lampen Aanbevolen model Benodigde stroomaansluitingen
20×20 (standaard eilandstand) 8–10 lights 50W Linkable 2 drops
20×20 (met productzones) 10–12 lights 50W perimeter + 21W binnenruimte 2 drops
20×30 island 12–16 lights 50W Linkable 2–3 drops
30×30 island 16–20 lights 50W Linkable 3–4 drops

💡 Stap voor stap: eilandstandverlichting opbouwen

  1. Breng eerst uw stroomaansluitingen in kaart first — know exactly where your floor outlets are before planning light positions
  2. Monteer lampen aan het buitenste perimeterframe of your booth structure, facing inward and downward at 30–45°
  3. Verdeel de lampen gelijkmatig around all four sides — one light per 5–6 ft of perimeter
  4. Verbind elke zijde afzonderlijk in een daisy-chain independently: 2–3 lights per chain, connected back to the nearest power drop
  5. Voeg binnenverlichting toe for product display zones, shelving, or demo stations using 21W linkable units
  6. Test vanaf alle vier zijden before the show opens — check for dark zones and uneven coverage
  7. Label uw voedingskabels by zone — island setups are complex and easy to troubleshoot if labeled

Een verlichtingsplan op maat voor uw eilandstand nodig?

Use our calculator for a quick estimate, or contact us for a full custom quote.

Gebruik de verlichtingscalculator → Vraag een offerte op maat aan

Veelgestelde vragen

Wat is een eilandstand op een beurs?
An island booth is open on all four sides with no shared walls with neighboring exhibitors. Island booths are typically 20×20 ft or larger and are positioned in the center of the show floor, allowing visitors to approach from any direction.
Hoeveel lampen heb ik nodig voor een eilandstand van 20×20?
Most 20×20 eilandstand booths need 8–12 lights for full coverage. Eight lights cover the perimeter; add 2–4 more for interior product zones or demo stations. Use the 50W linkable arm light to daisy-chain up to 6 units per power drop.
Hoe voed ik lampen op een eilandstand met weinig stopcontacten?
Daisy-chaining is de standaardoplossing. Our 50W linkable arm light chains up to 6 units from a single outlet, so a 12-light island setup needs just 2 power drops. Plan your chain layout before the show to minimize cord runs across the floor.
Moeten lampen voor eilandstands ETL-gecertificeerd zijn?
De eisen verschillen per evenement en aannemer. Geselecteerde 50W- en 21W-modellen hebben een ETL-vermelding; controleer het exacte SKU en de actuele eisen in de exposantenhandleiding.
Kan ik dezelfde lampen voor een eilandstand en een inline-stand gebruiken?
Ja, maar u hebt er meer nodig en een daisy-chain-strategie is vereist. The 50W linkable arm light works for both booth types — it’s the most versatile option if you exhibit in different booth configurations at different shows.