Verlichting voor beursstands van 10×20

Verlichting voor beursstands van 10×20

Een stand van 10×20 is twee keer zo groot als een standaard inline-stand en vraagt om een andere verlichtingsaanpak. This guide covers exactly how many lights you need, which products to use, and how to position them for maximum impact.

⚡ Snel antwoord: verlichting voor een stand van 10×20

  • Aanbevolen aantal: 4–6 lights
  • Beste wattage: 35W or 50W per light
  • Beste product: 35W LED Exhibition Arm Light or 50W Linkable LED Arm Light
  • Certificering: ETL-vermelding vereist op de meeste Amerikaanse locaties
  • Tip voor voeding: Gebruik het koppelbare 50W-model om maximaal 6 lampen vanaf 2 stopcontacten te verbinden

Waarom stands van 10×20 meer nodig hebben dan een standaardopstelling

Most exhibitors upgrading from a 10×10 make the mistake of simply doubling their existing lights. A 10×20 booth has 200 sq ft of floor space, often with a full-length backwall graphic, multiple product display zones, and visitors approaching from a wider angle. Under-lighting a 10×20 creates dark zones that kill dwell time and make your booth look smaller than it is.

De juiste aanpak is om de stand van 10×20 als twee verlichtingszones te behandelen — the backwall graphic zone and the product/demo zone — and light each independently.

Aanbevolen producten voor stands van 10×20

★ Beste keuze

35W LED Exhibition Arm Light

3500lm, CRI90+. The ideal single-light solution for 10×20 booths — bright enough to cover a wide zone without the cost of the 50W.

Bekijk 35W →
Beste voor daisy-chain

50W Linkable LED Arm Light

5500lm, ETL listed. Chain up to 6 lights from 1 outlet. Best for 10×20 island-style or when you need maximum brightness across the full backwall.

Bekijk 50W →
Budgetoptie

25W LED Booth Display Arm Light

3250lm, CRI90+. Use 5–6 units for full 10×20 coverage. Best when budget matters more than minimizing outlet count.

Bekijk 25W →

Hoeveel lampen heeft u nodig voor een stand van 10×20?

The right number depends on your display type and brightness goal. Here's the breakdown:

Opstelling Benodigde lampen Aanbevolen model Opmerkingen
Alleen textiele achterwand 4 lights 35W or 50W 2 per 10ft section, top-mounted
Achterwand + productschappen 5–6 lights 35W backwall + 21W shelving Mix arm lights for different zones
Open stand, algemene verlichting 4 lights 25W or 35W Even spacing across the 20ft span
Eilandachtige stand van 10×20 6 lights 50W Linkable Daisy chain from 1–2 outlets
Maximale helderheid / drukke beursvloer 6 lights 50W Linkable 33,000lm total output

💡 Aanbevolen opstelling: achterwand van 10×20 met 4 lampen

  1. Monteer 4 armaturen along the top rail of your backwall, evenly spaced at ~5ft intervals
  2. Richt elke lamp downward at 30–45° toward the graphic surface
  3. Gebruik 4500K (neutraal wit) for most graphics; switch to 3000K for warm brand aesthetics
  4. Voeding: With 35W lights, you need ~140W total — one standard 15A outlet handles all 4
  5. Met koppelbare 50W-lampen: daisy-chain all 4 from a single outlet, one power cord to the floor

Weet u niet welke opstelling bij uw stand past?

Use our free calculator to get a personalized recommendation in under 2 minutes.

Gebruik de verlichtingscalculator → Vergelijk alle producten

Veelgestelde vragen

Hoeveel lampen heb ik nodig voor een beursstand van 10×20?
De meeste stands van 10×20 hebben 4–6 lampen nodig. Four lights work well for a fabric backwall; five or six are recommended when you have both a backwall and product shelving, or when you want maximum brightness on a busy show floor.
Welk wattage is het beste voor een stand van 10×20?
35W per lamp is voor de meeste opstellingen van 10×20 de beste balans — bright enough to cover a wide zone without the cost of the 50W. If you need daisy chaining or maximum brightness, the 50W linkable arm light is the better choice.
Kan ik lampen daisy-chainen op een stand van 10×20?
Ja. Onze koppelbare 50W-armatuur verbindt maximaal 6 units vanaf één stopcontact — ideal for 10×20 booths where floor outlets are limited. The 21W linkable model chains up to 10 units and works well for shelving zones.
Heb ik ETL-gecertificeerde lampen nodig voor een stand van 10×20?
De eisen verschillen per beurs, locatie en elektrotechnische aannemer. Many US events request listed electrical equipment; controleer de ETL- of UL-documentatie van het gekozen model en de actuele exposantenhandleiding.